i won this in a Facebook Contest i was so thrilled i was excited about this Aspire Quad Flex Survival kit since i can run either RDTA or RDA as most know i always use an RDA as i prefer the flavor so this kit comes with quite a few options as this is a 4 in one kit RDTA RDA RDA2 and MTL Tank we will run thought all the options and parts that come in this kit below and talk about each option as always ill give my opinion of this kit
using the pre built coils in the package installing both claptons came out to a 0.3 ohm build running at 45w i found the vape to be so hot almost impossible to vape so i switched coils and made my own set of twisted coils 0.3 ohms building on the deck for this is quite easy i found wicking to be really easy also changing from the RDTA to the RDA option was so easy just unscrew from the glass base cut the wicks and attach the RDA Base you have the option of using the frosted or clear glass on this option as you should know the RDA is the top half of the RDTA removing the cover revealed the deck as shown in the image to the right unscrewing the deck of the tank body you will see the holes under that the wick goes through into the tank and the center post that holds the deck in place
using the pre built coils in the package installing both Clapton coils it came out to a 0.3 ohm build running at 45w to 90w i found the vape to be quite nice even with the airflow completely open it produced great vapor production and great flavor my only issue is the drip tip not having the option to support a taller wide bore as you see there is not much to the RDA option only 5 parts most of which are already assembled from the RDTA option we wouldn’t only have to unscrew from the tank part of the RDTA and screw on the RDA base as shown to the left the tip screws out not pulls out the inside of the RDA Sleeve allows you to run single or dual airflow by turning it to open or close one of the airflow slots off this uses the same deck as we talked about for the RDTA 2 post dual hole i found the holes to be on the smaller side limiting your build this does have an adjustable center pin
using the second option for the RDA for top airflow this was not bad very similar to above regular side airflow but i found the airflow to be slightly more restricted my only issue with this option is that the top airflow is so easy to catch and closes on you if you are not paying attention the flavor was more intense on this option compared to the regular side air flow option and vapor production is good but not as good as the side airflow RDA you do have the option to run a 510 drip tip on this RDA or RDTA by using the adapter as shown to the left but i found that just made the airflow even tighter i honestly can say i don’t like this option flavor is great but it’s just too restricted for my liking
this is a great option for beginners the mouth to lung hit is perfect for those still trying to give up the stinky sticks or new to vaping i found it to give quite the throat hit depending on the juice that is used i didn’t have no issues running an 80% VG you can use either the clear or the frosted glass on this option the coil for this option is a 1.8 ohm recommended running between 12w and 16w
this is a great kit i enjoyed vaping on both the RDTA and the RDA option the airflow for me was perfect i didn’t find it to airy at all its really easy to build on but i feel builds are restricted with the small post holes but if you are a beginner and get this it will make a great step up kit as you advance. filling the RDTA can be a little tricky depending on what you use to fill the tank with you can remove the deck and fill the tank but then you have to fight getting the cotton back in right or fill through one of the holes in the deck with a needle tip bottle which is how i like to do it but can cause some over flow if you’re not careful in my video i tried to cover all things with this device with out making it too long to watch this is a good kit and priced reasonably good for the amount of options you get
Survival Kit Package Contents:
- 1 x Quad Flex RDTA
- 1 x Replacement Nautilus X 2mL Pyrex Glass
- 1 x Nautilus X Top Hardware
- 1 x 510 Drip Tip Adapter
- 1 x Capillary Screw
- 1 x Top Harware With Top Airflow
- 1 x RDA Base
- 1 x Nautilus X 1.8Ω Coil
- 1 x Organic Cotton Bag
- 1 x Allen Key
- 2 x Pre-Built Clapton Coils
- 4 x Spare Screws
- 6 x Spare O-Rings
Fight for Your Right to Vape!
These reviews are my own personal opinions from my own experiences
Your results may vary from mine.
You must be of Legal vaping age, to purchase and use vape related products
Y333vape’s is only for persons of legal vaping age.
check out my sponsors
Affiliate & Referral links are used that’s how i get paid.
vaping is a choice we all make on our own accord
i am not held responsible for any injury you may occur while you vape