Tesla two Sub Mod Kit 100W Review

so i got my hands on the Tesla two Sub Mod Kit
This is an unregulated device and is recommended for experienced users

i didn’t like not having a display screen to tell how many watts i was running at while this is an easy mod to use it does have some issues i found after a period of vaping on this device the temp seemed to increase and the vapor started getting hotter and hotter

and the mod it self felt quite warm on coil setting 30w to 50w so i changed to coil setting 0w to 30w  still the same issue  also tried on the 50w to 80w setting and still the same
will this mod run other tanks yes but do use caution the coil Resistance is 0.1 ohm to 3.5 ohm i tried with a few different tanks all worked but didn’t like that i couldn’t change wattage

whats in the box 1 Mod 1 Tank 1 USB cable 1 0.2 ohm Coil 1 Manual

Mod Specifications

  • Material: Aluminum
  • Threading: 510
  • Dimensions: 22mm x 47mm x 76mm
  • Positive Pin: Spring-Loaded Silver-Plated Copper
  • Capacity: 4000mAh Internal battery
  • Max Output Power: 100W
  • Resistance Range: 0.1Ω – 3.5Ω
  • LED Battery Indicator: 3.2V – 3.65V > Red | 3.65V – 4.2V > Blue

Tesla Mod
This comes in a variety of colors mine is blue
nice fire button standard 510 connection Micro USB charging port

Tank Specifications

  • Height 73mm
  • Diamiter 22 mm
  • Capacity 7ml 
  • Connection 510
  • Glass Pryex 
  • Drip Tip Wide bore
  • Material Stainless Steel
  • Coils 0.5Ω Ohm 0.2Ω Ohm

so lets take a look at each part of the tank below

Drip Tip

this is a wide bore dip tip made of  Stainless Steel
this screws into the top of the tank does not push in like most


The base features bottom airflow control and uses standard 510 connection


The Coils comes with pre-installed 0.5Ω Ohm and a spare 0.2Ω Ni Ohm each coil has 3 holes small medium large each hole represents a different resistance for the coil small 0W to 30W medium 30W to 50W large 50W to 80W


the tank holds 7ml of juice that’s quite a large amount

made of stainless and Pyrex glass

My Conclusion and Thoughts

Keeping in mind this is a unregulated device is not at all a bad little kit im not all that keen on unregulated devices i like to adjust to the settings i like while you can change the wattage output via the coil this is a little bit of a hassle to have to keep doing that i would not recommenced this device to a beginner this is more of an advanced vapers kit
as for the tank that came with this device its not a bad tank easy to use and easy to clean on both coils they preformed great apart from other devices not recognizing the tank was attached  i tried on the Evic IPV4 Pegasus did not recognize it the coil does look easy enough to rebuild this is a horizontal build

one thing i found is that this device takes a few clicks to activate again i found every now and then i would have to slightly unscrew tank from mod and re-screw it back on so it can detect it again this becomes frustrating after the first 20 times 

with this kit it did lack lots of information that should have been provided even the main manufacturing website did not provide much information about this device

RATING 7 out of 10

You Can Purchase one of these for your self from gearBest HERE 
Original 100W Tesla Two Box Mod E-cig Kit
Price $51.95

This is my honest personal opinion
I was NOT paid or offered a reward for doing these reviews

If you want your Vaping Products reviewed Drop me a E-Mail at y333vape@gmail.com
or sent me a message on Twitter @Y333vape